- Question Title: atlas-copco-185-john-deere
- Asked by: John Penwell
- Asked On:
- Answers: 4
My air compressor works normal at low idle while using small tools but when I run s bigger tools and the compressor goes to high idle it will shut down could anyone help me troubleshoot this thing. Thanks again
Answers & Replies
Log in or create an account to make a comment...
When it shuts down, what is the pressure?
Does the engine bog down?
Please check the fuel filters and the air inlet filter of the engine, those are the problem most often.
(at high load the engine doesn't get enough fuel or air).
If those are OK, please report back and we will investigate further.
Best,
Cas
The compressor is shutting down for high temp. When the machine is at idle and not running the oil level on the separator indicates low some. But while running in high idle the level indicates In the ok position and kinda bounces off of high level. Could this be a problem? Is there a separator filter or screen thanks for your help
Should the level be in the ok position while not running? The machine is sitting level.
Should the level be in the ok position while not running? The machine is sitting level.