plant manger
Question
I FACED THAT AFTER REFERAGERANT AIR DRYER CONDENSTION HAPPEN WHICH MAKE A BIG PROBLEM TO MY FINISHED PRODUCTS, DUE TO MOISTURE FORMING AT POWDER COATING (THREMOSET POWDER0).
CAN I PREVENT THIS CONDENSATION IF I INCREASE THE AIR TEMPERATURE AFTER AIR DRYER?
Also if I use this sequance of working :
first air dryer => heated air reciver
(25C )=> second air drye
thanks in advance
1 Answer
Hi,
At what point is this condensation taking place?
Please check your dryer. What is the dewpoint temperature on the indicator? It should be between 1 and 5 degrees Celsius.
Is the capacity of the dryer big enough for your air flow? Is the temperature of the incoming compressed air not too hot?
If you really must have a lower dewpoint, best to install a desiccant dryer instead.
Good luck.
Cas.
Share Your Knowledge
Have experience with this issue? Help others by sharing your solution.