This website requires Javascript for some parts to function propertly. Your experience may vary.

Page | Air Compressor Guide
info@air-compressor-guide.com Independent Troubleshooting & Training Resource
Q&A Archive Question

Oil Discharge on Atlas Copco XAS77 diesel air compressor

Guest January 15, 2018 2 Answers
Question
Recently our Atlas Copco XAS77 has been sending oil through the air tap, have changed the separator filter as advised but with no joy. It seems to be the right hand tap on a two tool compressor. What can you advise. Many thanks!!!!

2 Answers

Expert 8 years ago
Hi, Please also check the scavenge system (scavenge line and scavenge pipe). The scavenge pipe sucks up the oil that collects at the bottom of the separator. It is sucked through the scavenge line back to the compressor element (air-end). If this system doesn't perform properly, the oil will accumulate inside the separator and will eventually flow with the compressed air out of the compressor. Please see:http://www.air-compressor-guide.com/blog/how-the-scavenge-line-keeps-your-compressed-air-oil-free Also, make sure you stop the machine in the correct way. An often made mistake with portable/diesel compressors is that workers just simply press the stop button while the compressor is running full-load. This will also lead to oil coming out of the compressor. Always switch to unloaded for a minute or two before shutting down the compressor to prevent this. For more info about this: http://www.air-compressor-guide.com/learn/compressor-types/portable-air-compressor/portable-air-compressor-operation Good luck, let me know when you found what the problem was.
ixzphvpdyp 6 years ago
opzgzdpduutiiypnrlhdorskorptao

Share Your Knowledge

Have experience with this issue? Help others by sharing your solution.